Using Callback; Storing A Callback; Accepting A Callback - Siemens HiPath 4000 OpenStage 10 T Operating Instructions Manual

Basic functions
Step by Step
j
Enter code!
26

Using callback

If your belongs to an ONS group (parallel call
page 64), please note the following:
Callback on busy is only signaled on the busy
phone, not in the whole ONS group.
Callback on no reply is entered in the mailbox
( page 12) on all internal system phones in an
ONS group.

Storing a callback

Prerequisite: The internal station called is busy or no-
body answers.
if available:
S
Press the "Callback" key. The LED lights up.
or
Enter the code programmed on your phone for "Auto
callback"
If the called party was busy, the callback is auto-
matic.
If the called party did not answer, a message is
left in the called party's mailbox.

Accepting a callback

Prerequisite: The internal station called was busy. You
have saved a callback.
Z
Your telephone rings.
^
Lift the handset. You hear a ring tone.
If the party has activated call forwarding
( page 22), you will receive the callback from
the call forwarding destination.
Cancel call backs
Do not answer the call. After ringing four times, the call-
back is canceled.
page 68.