Bundled Software Installation - Mercury KN6100M User Manual

Note: To install the CNR card driver, please select the "Modem" item manually
after the Auto Setup. Click on "Next >" and the CNR card driver will
be installed automatically.
3 The support software will automatically install.
Once any of the installation procedures start, software is automatically
installed in sequence. You need to follow the onscreen instructions,
confirm commands and allow the computer to restart as few times as
needed to complete installing whatever software you selected. When the
process is finished, all the support software will be installed and start
working.
Installing under Windows NT or Manual Installation
If you are under Windows NT, the auto-installing program doesn't work
out; or you have to do the manual installation, please follow this proce-
dure while the Auto Setup screen pops out after inserting the support CD-
ROM:
1 Click the ReadMe to bring up a screen, and then click the
Install Path at the bottom of the screen.
2 Find out your mainboard model name and click on it to obtain
its correct driver directory.
3 Install each software in accordance with the corresponding
driver path.

Bundled Software Installation

All bundled software available on the CD-ROM is for users' convenience.
You can install bundled software as follows:
1 Click the Application button while the Auto Setup screen
pops out after inserting the support CD-ROM.
2 A software menu appears. Click the software you want to
install.
3 Follow onscreen instructions to install the software program
step by step until finished.
Chapter 4: Software & Applications
43