Install Other Devices - Mercury KN6100M User Manual

Motherboard User's Guide

Install Other Devices

Install and connect any other devices in the system following the steps
below.
Floppy Disk Drive
The motherboard ships with a floppy disk drive cable that can support
one or two drives. Drives can be 3.5" or 5.25" wide, with capacities of
360K, 720K, 1.2MB, 1.44MB, or 2.88MB.
Install your drives and connect power from the system power supply.
Use the cable provided to connect the drives to the floppy disk drive
connector FDD.
IDE Devices
IDE devices include hard disk drives, high-density diskette drives, and
CD-ROM or DVD-ROM drives, among others.
The mainboard ships with an IDE cable that can support one or two IDE
devices. If you connect two devices to a single cable, you must configure
one of the drives as Master and one of the drives as Slave. The documenta-
tion of the IDE device will tell you how to configure the device as a
Master or Slave device. The Master device connects to the end of the
cable.
Install the device(s) and connect power from the system power supply.
Use the cable provided to connect the device(s) to the Primary IDE
channel connector IDE1 on the motherboard.
14