Integrated Peripherals Page - Mercury KN6100M User Manual

Motherboard User's Guide

Integrated Peripherals Page

These options display items that define the operation of peripheral
components on the system's input/output ports.
IDE Function Setup
RAID Config
Onboard Device Setup
Super IO Device
F1: General Help F5: Previous Values F6: Fial-Safe Defaults F7: Optimized Defaults
IDE Function Setup (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
OnChip IDE Channel 0
Primary Master PIO
Primary Slave PIO
Primary Maste UDMA
Primary Slave UDMA
Secondary Master UDMA
Secondary Slave UDMA
IDE DMA transfer access
Serial-ATA Controller
IDE Prefetch Mode
IDE HDD Block Mode
F1: General Help F5: Previous Values F6: Fial-Safe Defaults F7: Optimized Defaults
On-Chip IDE Channel 0
Use these items to enable or disable the PCI IDE channels that are integrated
on the motherboard.
Primary Master/Slave PIO
Each IDE channel supports a master device and a slave device. These four
items let you assign the kind of PIO (Programmed Input/Output) was used
by the IDE devices. Choose Auto to let the system auto detect which PIO
mode is best, or select a PIO mode from 0-4.
Primary/Secondary Master/Slave UDMA
Each IDE channel supports a master device and a slave device. This
motherboard supports UltraDMA technology, which provides faster access
to IDE devices.
If you install a device that supports UltraDMA, change the appropriate item
on this list to Auto. You may have to install the UltraDMA driver supplied
with this motherboard in order to use an UltraDMA device.
Phonex-AwardBIOS CMOS Setup Utility
Integrated Peripherals
[Press Enter]
[Press Enter]
[Press Enter]
[Press Enter]
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
Phonex-AwardBIOS CMOS Setup Utility
IDE Function Setup
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
[All Enabled]
[Enabled]
[Enabled]
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
30
Help Item
Menu Level
Help Item
Menu Level