Advertisement
Handle bar height
The height of the handle bars affects the
comfort of the ride. It determines the pressure
on the hands and the position of the back.
Determine your own most comfortable height
by using the bike.
To adjust the handle bars:
1. Slightly loosen the screw by using an Allen
key.
2. Slide the handle bars to the correct height
and tighten the screw very firmly again.
Do not pull out the handle bars further than the
mark. Otherwise the tube will not be deep enough in
the shaft and will risk coming off, which can lead to
serious injuries.
Position handle bars
You can tilt the handle bars. This influences
the distance from the handle bars to the upper
body. Determine your own most comfortable
position by using the bike.
To tilt the handle bars:
1. Slightly loosen the screws (A) and (B) with
an Allen key.
2. Put the handle bars in the desired position
and then tighten the screws considerably.
3. Slightly loosen screw (C) with an Allen key,
put the handle bars in the correct
(horizontal) position and then tighten the
screw again.
User manual
Balance 06.13
1.
3.
[A]
1.
2.
MIN INSERT
2.
[C]
[B]
7
Advertisement
