Advertisement
.
With the on/off button, you can turn off the system. When the system is not used, it
will automatically turn off after a certain time.
You can see the battery level at the indication lights at the coloured display. If only
the red light is on, the battery is almost empty and needs to be recharged or
replaced by a new, fully charged battery.
When the last red light flashes, the battery is empty and the engine will not support
you any longer while cycling.
When you push the bicycle, turn off the motor.
When the motor is not used for several days, the battery switches into the sleeping
mode. This to protect the batteries. To activate it, you must connect the battery to
the charger for a few seconds or cycle the bike forwards and push the on/off button
to activate the system.
Charging the Battery:
1
3
For the best performance and to prolong the
.
.
life of the battery, we recommend that you
charge the battery at home at room
temperature.
To charge the battery:
2
1
.
Open the little lock by turning the key a
quarter (to the right)
2
Pull the handle forward.
3
Take the battery pack into the house. Plug the
charger into the plug contact of the battery.
4
Connect the charger plug into the socket. The
red light on the charger will light up.
4.
User manual
Balance 06.13
11
Advertisement
