10. Now you will see the DID code from your device that you entered during
account setup. Enter the security sode you created in Uniden Remote Service
software installation (see page 35).
11. Click StArt.
# The security code you enter on the Uniden Video Portal and the apps must
match the security code you entered during Uniden Remote Service software
installation. Anytime you change the security code in that software, you must
make the corresponding change on the Portal or the apps.
Using Remote Access
If you want to view your video remotely, you must do the following:
1. Verify that your PC is connected to the internet and that Uniden Remote Service
software is installed.
2. Use the USB cable to connect the monitor and the PC.
3. Launch the Uniden Remote Service software.
4. Enter the security code.
5. Select CoNNeCt to iNterNet.
Your system is now connected to the internet and your cameras' video can now be
remotely viewed through iPhone, iPad, Android smartphones and tablets, and PC
via the UnidenVideo Portal.
Record Video through the Portal
The Portal lets you record live video and save it to your PC.
1. Click reCord to start recording.
2. Click Stop reCord to stop recording.
38