Alarm Buzzer - Uniden G17xx Series Owner's Manual

CH+
2. Use and
intervals. Press
diSplAy screen.
• The Activate or Deactivate setting (CAmerA Setup screen) affects which
cameras display in Scan mode.
• Audio is available from camera 1 in Quad mode, from whatever camera is a
previously viewed channel, or from a channel triggered by motion detection.
Default
The deFAult screen gives you the options of selecting a default language. Options
are English, French (Français) or Spanish (Espanol).
1. From the SyStem Setup screen, use
M
press . The deFAult screen displays.
# The language selected when setting the deFAult will be the system language
after any system restoration.
CH+
2. Use and
(Espanol). Press
The deFAult screen will also alert you when it detects a new firmware upgrade on
the SD card. Go to page 44 for details.

ALARM BuZZeR

You can set the alarm buzzer to go off when a camera detects motion and begins
recording.
1. From the main menu, use
Buzzer.
M
2. Press to toggle the setting between oN and oFF.
28
CH-
to choose between QuAd and 5, 10, and 15 second
M
to accept the change and return to the multi ChANNel
CH-
to choose between English, French (Français), or Spanish
M
to confirm and back out.
CH+
VoL+
and
CH- VoL+
, , , and
VoL-
to select deFAult and
VoL-
to select AlArm