CH+
2. Use
and
M
Press
to enter the camera masking preview page.
3. A grid displays over the image on the screen. While in masking preview, use
CH+
CH-, VoL+
,
be ignored. Press
unmask a block.
esC
4. Press
to save the entire mask and return to the previous screen. Mask other
cameras as needed.
Record Time
Use reCord time to set a specific length of time for motion recording. Options are
2, 5, or 10 minutes.
1. From the reCorder Setup screen, use
M
time; press
CH+
2. Use
and
M
Press
to confirm selection.
esC
3. Press
to return to the previous screen.
eVent LIst
This selection lets you play back recorded files. The eveNt liSt screens let you
browse through levels of folders for find a specific recorded file for a specific date
and hour on a particular day.
# This is the default screen when you access the main menu from any other
screen.
24
CH-
to select a camera (1 - 4) for setting up the masking area.
VoL-
, and
to select the masking block(s) where motion is to
M
to confirm each selection. You can also press
to select. The Setup detAil optioNS screen displays.
CH-
to select either 2, 5, or 10 minutes as the recording time.
VoL+
VoL-
and
M
again to
to select reCord