Selection Printed Edition - KERN DE6K0.5A Operating Instructions Manual

7.6 Selection printed edition

Using this function data are selected which are to be sent via the
printout
RS232C (not valid for data transfer mode BAPr ).
0.0
g
Vn T
LAPR
By that way the user can configurate his own data block, which then
is sent to a printer or to a PC.
30
In weighing mode keep the PRINT key pressed until [Unit]
appears.
Press the MODE key several times until „LAPr" is displayed.
Acknowledge using SET key, the current setting is displayed.
Select the desired output parameter by pressing the MODE key
Edition of the headlines
Hdr
Edition of the total weight
GrS
Net Edition of the net weight
tAr Edition of the tare weight
Edition of the stored weight
N7E
Edition of quantity
PCS
AUJ Edition of the unit weight
Rqt Edition of the reference quantity
FFd Edition of a page feeding at start printer output
Edition of a page feeding at end printer output
FFE
After actuating the SET button, the current state is displayed ( on
/ off ).
Use MODE and PRINT key to change the status
„on off".
Use the SET key to confirm selection. The balance returns to
weighing mode.
DE-BA-e-1052