Main Controller Pcb; Preparation For Removing The Main Controller Pcb; Removing The Main Controller Pcb; Relay Board - Canon LBP3010 Series Service Manual

[1]
[2]

3.1.11 Main Controller PCB

3.1.11.1 Preparation for Removing the Main Controller
PCB
LBP3100 / LBP3010B
1) Removing the Upper Cover (page 3-2)Referense[Removing the Upper
Cover]
2) Removing the Left Cover (page 3-2)Referense[Removing the Left Cov-
er]

3.1.11.2 Removing the Main Controller PCB

LBP3100 / LBP3010B
1) Remove the main controller unit [1].
- 1 flat cable [2]
- 1 screw (w/washer)[3]
- 2 screws (TP) [4]
[4]
2) Remove the guide [1] in the arrow [A] direction.
- 1 claw [2]
3) Remove the 4 screws [3] and remove the main controller PCB [4] in the
arrow [B] direction.
[1] [3]
[2]
F-3-26
[1]
[A]

3.1.12 Relay Board

3.1.12.1 Preparation for Removing the Memory Contact
Unit
LBP3100 / LBP3010B
1) Removing the Upper Cover (page 3-2)Reference[Removing the Upper
Cover]
2) Removing the Left Cover (page 3-2)Reference[Removing the Left Cov-
0019-3218
er]
3) Removing the Right Cover (page 3-1)Reference[Removing the Right
Cover]
4) Removing the Front Cover (page 3-3)Reference[Removing the Front
Cover]
5) Removing the Rear Cover (page 3-1)Reference[Removing the Rear
Cover]
6) Removing the Separation Pad (page 3-18)Reference[Removing the Sep-
0019-3219
aration Pad]
7) Removing the Pickup Tray Unit (page 3-4)Reference[Removing the
Pickup Tray Unit]

3.1.12.2 Removing the Memory Contact Unit

LBP3100 / LBP3010B
1) Remove the scanner sub cover [1].
- 1 screw [2]
2) Remove the scanner cover [1].
- 3 screws [2]
[2] [3]
[B]
[4]
F-3-27
[1]
F-3-28
Chapter 3
0019-4853
0019-4854
[2]
3-9