Main Drive Unit; Preparation For Removing The Main Motor; Removing The Main Motor - Canon LBP3010 Series Service Manual

Chapter 3
4) Remove the drive belt [1].
Points to note at installation
- When assembling the drive gears, follow the order as below.
[2] [1]
[5]
[1] Primary speed down pulley
[2] Timing belt
[3] Fixing ratchet gear
[4] Fixing gear
[5] Cartridge gear
[6] Coupling gear
[7] Delivery speed down W gear
[8] Compression spring
[9] Compression spring
- When attaching the drive gear, align the 7 shaft holes [1] with the drive
cover [2].
3-6
[1]
[1]
F-3-13
[1]
F-3-14
[4] [3]
[8]
[6]
[9]
[7]
[1]
[1]

3.1.9 Main Drive Unit

3.1.9.1 Preparation for Removing the Main Motor

LBP3100 / LBP3010B
1) Removing the Upper Cover (page 3-2)Reference[Removing the Upper
Cover]
2) Removing the Left Cover (page 3-2)Referense[Removing the Left Cov-
er]
3) Removing the Right Cover (page 3-1)Referense[Removing the Right
Cover]
4) Removing the Front Cover (page 3-3)Referense[Removing the Front
Cover]

3.1.9.2 Removing the Main Motor

LBP3100 / LBP3010B
1) Remove the scanner sub cover [1].
- 1 screw [2]
2) Remove the scanner cover [1].
- 3 screws [2]
[2]
[1] [2]
F-3-15
0019-2415
0019-2416