Delivery Tray; Removing The Delivery Auxiliary Tray; Pickup Tray; Preparation For Removing The Pickup Tray Unit - Canon LBP3010 Series Service Manual

Chapter 3
Points to note at installation
Make sure that the switch arm [1] does not contact with the edge of the plate
[2] when attaching the cover.
[1]

3.1.6 Delivery Tray

3.1.6.1 Removing the Delivery Auxiliary Tray

LBP3100 / LBP3010B
1) Remove the delivery auxiliary tray [1].
- 2 shafts [2]
- 2 shaft supports [3]
[2]
[3]

3.1.7 Pickup Tray

3.1.7.1 Preparation for Removing the Pickup Tray Unit

LBP3100 / LBP3010B
1) Removing the Upper Cover (page 3-2)Reference[Removing the Upper
Cover]
2) Removing the Left Cover (page 3-2)Reference[Removing the Left Cov-
er]
3) Removing the Right Cover (page 3-1)Reference[Removing the Right
Cover]
4) Removing the Front Cover (page 3-3)Reference[Removing the Front
Cover]
5) Removing the Rear Cover (page 3-1)Reference[Removing the Rear
Cover]
6) Removing the Separation Pad (page 3-18)Reference[Removing the Sep-
aration Pad]
3-4
[2]
[2]
[3]
[1]
F-3-7

3.1.7.2 Removing the Pickup Tray Unit

LBP3100 / LBP3010B
1) Remove the 4 screws [1].
2) Turn the host machine [1] in the direction of the arrow.
0019-4449
3) Remove the pickup tray unit [3].
- 4 screws [1]
- 4 hooks [2]
0019-3090
[1]
F-3-8
[1]
F-3-9
0019-3099