according to the temperature in the following table.
11
10
9
Print
8
7
6
5
4
3
2
1
0
Mode 2: sequence (For prevention of temperature increase in the edge)
Condition: paper length is 264mm or longer while paper width is 190mm or shorter
Operation: print speed drops to 3ppm from the 2nd sheet of continuous print. Simultaneously, control the target temperature of the fixing assembly within the
range of approx. 155 deg C to 170 deg C.
Mode 3: sequence (For prevention of temperature increase in the delivery unit)
Condition: paper width is 190mm or longer
Operation: print speed drops to 5ppm from the 251st sheet of continuous. Simultaneously, control the target temperature of the fixing assembly within the range