Table of Contents
Advertisement
Fig. 10
Dispenser bottom view
10.3
10.1
10.2
7. Connect supplied 3/8" water line between water
supply and water inlet fitting (Fig. 10.1).
8. Using supplied 3/4" drain tubing and barbed fittings,
connect 3/4" barbed drain elbow fi tting on dispenser
to 3/4" FNPT drain (Fig. 10.2).
9. Route power cord through utility access hole to
power supply (Fig. 10.3).
10. Turn on water supply and check for leaks.
Fig. 11
11. Install bottom panel (Fig. 11).
25CI400A/W • 25HI400A • 50CI400A/W • 50HI400A
9
Advertisement
Chapters
Table of Contents
Troubleshooting
