Getting Started; Changing The Battery - Vectronix USMC VECTOR 21 Operating & Operator Maintenance Instructions

Getting started

Open the battery compartment
using a suitable tool, or a coin.
Insert a 6V lithium battery, type
2CR5 or equivalent.
Ensure that the drawing ribbon
lies above the securing tape of
the battery cover. Keep the
battery cover seals and the
instrument case clean.
VECTOR ™- USMC VECTOR 21-V.0.3

Changing the battery

Refit the battery cover and re-
tighten the screw.
The VECTOR monitors the
battery's condition. If the display
shows 'Lo batt', this indicates
that the battery is used up. You
can still get readings, but the
battery needs to be replaced
soon.
www.
Shop for Vectronix products online at:
6
SCOUTBASECAMP
.com 1.877.766.5412
The 'Lo batt' display may also
appear under cold conditions,
since low temperature reduces
the battery performance.
Remove the VECTOR
i
battery before a prolonged
period of non-use.
Use non-magnetic batteries
only!
Getting started