Vectronix USMC VECTOR 21 Operating & Operator Maintenance Instructions page 47

Troubleshooting (continued)
Problem
Distance display blinks.
These symbols are displayed
during azimuth measurement:
VECTOR ™- USMC VECTOR 21-V.0.3
Possible cause
Multiple object measurement is
activated: see page 12.
The permissible angle has been
exceeded:
tilted too far upwards
tilted too far downwards
tilted too far to the right
tilted too far to the left
www.
Shop for Vectronix products online at:
47
SCOUTBASECAMP
.com 1.877.766.5412
Solution
Click the distance key to display
distances in succession (see
page 12).
Do not over-tilt or bank the
VECTOR.
Troubleshooting