Settings; Sound (Tones); Display Contrast; Temp Format (Fahrenheit And Celsius) - KitchenAid KEHU309 Use And Care Manual

5. To cook using the temperature probe, touch PROBE and
enter the desired food temperature, using the numerical keys.
6. To change the level of browning, touch BROWNING.
Touch "plus" (+) or "minus" (-) to increase or decrease the
desired level. Touch OK.
7. Once the setup is complete, the start key will light up.
When settings are correct, touch START. You will be
prompted to place the food in the oven and connect the
temperature probe. Place the food in the oven, connect the
temperature probe and touch OK.
8. Once the oven starts running, the Off key will light up. Touch
OFF if you need to shut the oven off during cooking.
9. When the set probe temperature is reached, the Check Food
message appears on the display. The probe temperature
begins to blink and the end of cycle tone will sound.
Touch OK.
10. Touch OFF when finished cooking.
Always unplug and remove the temperature probe from the
oven when removing food. The probe symbol will remain lit in
the display until the probe is unplugged.

Settings

Your oven provides you with the ability to control several of the
default settings and access information through the on screen
display. These include; Sound, Display Contrast, Temp Format,
Calibration, Water Filter, Learn Mode, Sabbath Mode, and
Languages.
To access the Settings menu, see the following sections.

Sound (Tones)

Tones are audible signals, indicating the following:
One beep
■ Valid key touch
■ Function has been entered
One chime
■
Preheat cycle has been completed
Two chimes
■ End of a cooking cycle
Three beeps
■
Invalid key touch
Four chimes
■ When timer reaches zero
Includes using the Timer for functions other than cooking.
Tone Volume (Sound)
■
The preset volume can be changed. On combination ovens,
you can change the sound from either display. Changing the
sound on one display changes the sound for both ovens.
To Change:
1. From the Main menu, touch MORE.
2. Touch SETTINGS.
3. Touch SOUND.
4. To change the sound level, touch the "plus" (+) or "minus" (-)
signs to increase or decrease to the desired level.
5. Touch OK.
NOTE: To turn the sound off touch - until the bar disappears
to the left.

Display Contrast

To Adjust Display Contrast:
1. From the Main menu, touch MORE.
2. Touch SETTINGS.
3. Touch DISPLAY CONTRAST.
4. Touch + (plus) or - (minus) to increase/decrease the display
contrast to the desired setting.
5. Touch OK.

Temp Format (Fahrenheit and Celsius)

The temperature is preset in Fahrenheit, however it can be
changed to Celsius.
To Change:
1. From the Main menu, touch MORE.
2. Touch SETTINGS.
3. Touch TEMP FORMAT.
4. Touch °F (Fahrenheit) or °C (Celsius).
5. Touch OK.
7