Roland LEC-300A User Manual page 124

5-6 Making Various Adjustments for Cutting
7.
Check the results of adjustment.
PRINT - CUT ADJ.
TEST PRINT
Cutting position and print-
ing position are aligned.
Description
You perform this when printing followed immediately by cutting yields positioning for printing and
cutting that is slightly misaligned. You print alignment marks, perform detection of the printed marks,
and correct the discrepancy.
Subtle misalignment between the printing and cutting positions may occur due to the thickness of the
media or the head height. We recommend making correction to match the media you're using.
Default Setting
[F] (feed direction): 0.00 mm
[S] (scanning direction): 0.00 mm
122
Chapter 5 Feature Reference
Press
Press
If the printing and cutting lines are aligned, adjustment is
complete.
If further adjustment is needed, go back to step
tune the adjustment.
Cutting position
Printing position
.
to execute.
6.
and fine-