Agri-Fab 45-03523 Owner's Manual page 10

STEP 20 - ATTACH SWEEPER TO TRACTOR
•
Place the tractor and sweeper on a flat level surface.
• Set the sweeper height adjustment handle to about
the middle of its adjustment range.
• Attach the sweeper hitch to the tractor hitch,
arranging the hitch spacers in one of six possible
combinations as shown in GROUP A and GROUP B
diagrams below.
IMPORTANT: To obtain the best performance from your
sweeper, arrange the spacers so that the sweeper bag is
approximately level with the ground and approximately 5" to
7" off the ground as shown in figure 22.
GROUP "A" - For vehicles with hitches
having 8" to 10" ground clearance.
HITCH BRACKET MOUNTED
BELOW HITCH TUBES
BLACK LINE IS TRACTOR HITCH
APPROXIMATELY LEVEL
(5" TO 7" FROM SURFACE)
FIGURE 22
GROUP "B" - For vehicles with hitches
having 10" to 13" ground clearance.
BLACK LINE IS TRACTOR HITCH
10
BRUSH HEIGHT ADJUSTED
APPROXIMATELY MID-WAY
HITCH BRACKET MOUNTED
ABOVE HITCH TUBES