Grandstream Networks HandyTone-486 User Manual page 24

HandyTone-486 User Manual
Firmware Key:
Authenticate Conf File:
Lock keypad update:
Allow conf SIP Account
in Basic Settings:
Override MTU Size:
Admin Password
SIP Server
Outbound Proxy
SIP User ID
Authenticate ID
Authentication
Password
Name
Automatic Upgrade:
No Yes, check for upgrade every
Always Check for New Firmware
Check New Firmware only when F/W pre/suffix changes
No Yes (cfg file would be authenticated before acceptance if set to
Yes)
No Yes (configuration update via keypad is disabled if set to Yes)
No Yes
0
Update
All Rights Reserved Grandstream Networks, Inc. 2005
Administrator password. Only administrator can configure the "Advanced
Settings" page. Password field is purposely left blank for security reason after
user clicks UPDATE button. This field is case sensitive and the maximum
password length is 25 characters.
IP address or Domain name provided by VoIP service provider
IP address or Domain name of Outbound Proxy, or Media Gateway, or Session
Border Controller. Used by ATA for firewall or NAT penetration in different
network environment. If symmetric NAT is detected, STUN will not work and
ONLY outbound proxy will provide solution for it.
User account information, provided by VoIP service provider (ITSP), usually
has the form of digit similar to phone number or actually a phone number.
ID used for authentication, usually same as SIP user ID, but could be different
and decided by ITSP.
Account information, password for ATA to register to (SIP) servers of ITSP.
SIP service subscriber's name which will be used for Caller ID display.
(in Hexadecimal Representation)
Cancel Reboot
24
Grandstream Networks, Inc.
10080
minutes (default 7 days)