Notes
The result of various settings for these parameters is
shown in table below, in terms of the equivalent code
passed to the PCL line termination command
( <ESC>&k#G ). The second setting (lfiscrlf on, criscrlf
off) is correct for most ASCII listings printed from
UNIX machines. PC listings should usually be done
with both items set to off, and Macintosh listings
usually require the third setting (lfiscrlf off, criscrlf
on). The following table shows the criscrlf/lfiscrlf
commands and the corresponding PCL Line
Termination command parameters.
LFISCRLF CRISCRLF
Off
Off
On
Off
Off
On
On
On
PCL Code
Comments
0
CR CR,LF LF,FF FF
2
CR CR,LF CR-LF,FF CR-FF
1
CR CR-LF,LF LF,FF FF
3
CR CR-LF,LF CR-LF,FF CR-FF