QMS 1800428-001B Reference Manual page 116

Select Selects the disk and accesses the card
address from which the optional font is
being installed.
Select Prompts you to insert the font card in
one of the card slots below the printer's
media cassette.
Begins reading data from the card and
installing the appropriate files on the
hard disk. This usually takes several
minutes.
Acknowledges completion of the
installation process.
Menu Exits from the Install Option menu and
returns to the Disk Operations menu.
After the option is installed, remove the card from the slot and place
the printer back on line.
Use the Administration/Disk Operations/Remove Option menu to re-
move optional fonts from your hard disk. You need the original font card
containing the files, because the contents of the card is compared to
the contents of the hard disk and the matching files are deleted from
the hard disk.
Procedure
After you have accessed the Administration/Disk Operations menu,
press the control panel keys in the order shown in the following table.
The printer responds by displaying a status message in the message
window (DSK refers to the hard disk number, and CAR0 and CAR1
refer to the font or card number).
» Note: You may need to press the Next key one or more times to
advance through the list of options.
Key Purpose
Select Accesses the Administration/Disk
Operations/Remove Option menu.
INSTALL SOURCE
CAR#: x
INSTALL OPTION
INSERT MEDIA
INSTALL OPTION
READING DATA...
INSTALL OPTION
INSTALL COMPLETE
DISK OPERATIONS
INSTALL OPTION
Message
DISK OPERATIONS
REMOVE OPTION