Permobil FAST MOVERS' Quick Start Manual page 18

Fig. 8
Saving settings
Put the seat in the position you want to save.
- Activate the memory function by pressing and holding the
memory button for two seconds, see fig. 8. You see a blin-
king green symbol when the memory function is activated.
- Press (4) for more than 2 sec. to release the stored setting
- Press and hold the desired memory function (5, 6 or 7) for
three seconds to save the settings for the seat; see fig. 8.
- The symbol above the current memory function turns red
and the control panel give a short audio signal when the
setting has been saved.
- Return to the control panel's standard function by pressing
the memory button (8), see fig. 8.
Retrieving settings
- Activate the memory function by pressing and holding the memory
button (8) for two seconds, see picture. You see a blinking green
symbol when the memory function is activated.
- Press and hold the button for the desired memory function (1, 2
or 3). The seat is adjusted to the position saved earlier, see fig. 8.
For reasons of safety, the button must be pressed and held until
the seat has reached the desired position.
- Once the saved setting has been reached, the seat mechanism
stops and the symbol above the memory location turns green.
The control panel gives a brief audio signal.
- Return to the control panel's standard function by pressing the
memory button (8), see fig. 8.
16
Memory function
The control panel has a built-in memory with
three memory locations. Each memory locati-
on can store all the seat's electric settings.