Samsung SMARTCAM SNH-E6440BN User Manual page 19

❖ Network Speed
Profile Name Resolution
Low Speed Network VGA
Mid Speed Network HD(720P)
High Speed Network Full HD(1080P)
`
n
What is relay mode?
If the network condition is unstable, the camera cannot make a normal connection
(P2P), so it will set up a connection in relay mode. In this case, you will see the video
for the first seven minutes only.
`
Relay mode is added feature where the video from the camera is transmitted to
Samsung server then retransmitted to the user's computer.
`
If you have trouble connection to the camera, visit "http://www.samsungsmartcam.
com", go to support page, and refer to "Troubleshooting" on it.
`
It is recommended to use one browser at one time.
`
If simultaneous accesses are made to the high speed network, video quality may be
low.
`
The Night Vision video produces a different visibility according to the distance between
camera and subject.
Recommended
Frame rate
bandwidth
20 fps 0.9Mbps
15 fps 1.2Mbps
20 fps 3Mbps
❖ Motion detection area setting
Click the < > icon.
1)
2) Drag it to the screen to set the detection area.
3) Click on <OK>.
If you want to delete the set area, click on <Delete All>.
`
n
The <Motion Detection> function needs to be activated in order to use the motion
zone function.
03
19