Page 2
EZN Plus Series 1. Overview The EZN Plus Series is a bullet type IP camera designed for outdoor use. The series comes in three models: EZN3160 Plus / 3260 Plus / 3340 Plus. Model Name Megapixel EZN3160 Plus 1.3 MP...
Note: Contact the shipper if any items appear to have been damaged in the shipping process. If any items are missing, notify your EverFocus Electronics Corp. Sales Representative or Customer Service Branch. Please also keep the shipping carton for possible future use.
EZN Plus Series 3. Installation This installation guide provides the basic instructions on installing an EZN Plus bullet IP camera. For details, please refer to the User’s Manual in the software CD. 3.1 Mounting and Wiring Follow the steps below for mounting and wiring the camera. Before screwing the camera to the wall, drill four holes on the wall according to the hole-positions on the supplied Quick-Mounting Ring.
Page 5
EZN Plus Series b. If you want to wire the cables through the wall, feed the cables through the wall and then screw the camera base to the Quick-Mounting Ring. Camera Base Quick-Mounting Ring Cables Connect the network, power and other cables of the camera to the related devices. Please refer to 2.
EZN Plus Series 3.2 Inserting a Micro SD Card You can optionally insert a micro SD card to the card slot on the camera module for recording videos. Remove the Sunshield from the camera. Loosen the screw on the Sunshield using the provided hexagon wrench.
EZN Plus Series 3.3 Adjusting Camera Focus / Zoom After wiring the cables, you can adjust the camera focus and zoom for better image quality. Follow Steps 1 ~ 3 in 3.2 Inserting a Micro SD Card to remove the camera cover. Connect the power cable of the camera to the power source.
EZN Plus Series 4. Accessing the Camera You have to assign an IP address for your camera to be accessible. To assign an IP address to the camera, use the IP Utility (IPU) software included in the software CD. Please connect the camera in the same LAN of your computer.
Page 9
EZN Plus Series You can also change the other settings by double-clicking the values. After configuring the values, click Save Configuration. Note: Most networks uses DHCP to assign IP address, if you are unsure of your network settings, please consult your network administrators for configuration details. 6.
EZN Plus Series 5. Network Connections You can use one of the methods below to connect the camera to the network. Router or LAN Connection This is the most common connection in which the IP camera is connected to a router and allows multiple users on and off site to see the IP camera on a LAN/WAN (Internet).
EZN Plus Series Direct High-Speed Connection In a Direct High-Speed Connection, the camera connects directly to a modem without the need for a router. You need to set the static or dynamic WAN IP address assigned by your ISP (Internet Service Provider) in the camera’s configuration web pages.
EZN Plus Series 6. Upgrading Firmware You can upgrade camera’s firmware using the IP Utility software included in the software CD. 1. Follow Step 1 to Step 4 in 4. Accessing the Camera to log in the camera. 2. Select the camera and then click Upgrade Firmware. A browsing window appears. 3.
Page 13
EverFocus USA - California: EverFocus USA - New York: 1801 Highland Avenue, Unit A, Duarte, CA 91010, USA 415 Oser Avenue, Unit S, Hauppauge, NY 11788, USA TEL: +1 626 844 8888 TEL: +1 631 436 5070...