Table of Contents
Advertisement
Configuration Variants
Submodules for the CPU
Various controllers can be plugged in on the CPU. The following is a brief
description of the available options:
LAN Con trol ler 10/100 MBit
This controller can be used to incorporate the BEETLE /XL-II in an Ethernet
network (10/100). It uses the internal PCI bus.
CRT- or TFT-Adapter
Both adapters must be installed alternatively. You can connect either a CRT
monitor or a TFT-LCD module with optional touch screen functionality.
When installing a TFT adapter with touch screen functionality make sure
that the touch functionality will be activated via jumper (see jumper settings
in the user guide "BEETLE POS Motherboard").
The COM2 interface is no longer available for external use. If the BEETLE
system is pre-installed ex works, COM2 will delivered with a cover.
In stal ling a Sub mo du le
First ensure that the system is switched off and that the power connector is
disconnected.
Loosen the two screws at the rear side (see arrows).
SUBMODULES FOR THE CPU
33
Advertisement
Table of Contents
