Belling Gas Hobs Users Manual & Installation Handbook page 20

Connect to the electricity supply
For hobs that are supplied/manufactured
with a 13Amp supply cord and plug only.
Warning: Ensure that the power rating of
the appliance is compatible with a 13Amp
supply beore connecting to the electricity
supply. i.e. 2.8kW.
Warning: This appliance must be
earthed.
The flexible mains lead is supplied con-
nected to a BS 1363 fused plug, the plug
is fitted with the correct fuse.
Replace only with a fuse of the same rat-
ing and type.
The wires in the mains lead are coloured
in accordance with the following code:
Green and yellow = Earth,
Blue = Neutral,
Brown = Live.
As the colours of the wires in the mains
lead for the appliance may not corre-
spond with the coloured markings identi-
fying the terminals in your plug, proceed
as follows:
1. The wire which is coloured green and
yellow must be connected to the terminal
marked E (Earth) or coloured Green.
2. The wire which is coloured blue must
be connected to the terminal marked N
(Neutral), or coloured Black.
3. The wire which is coloured brown must
INSTALLATION
be connected to the terminal marked L
(Live), or coloured Red.
The plug and socket must be accessible
after installation. Should the mains lead
of the appliance ever require replacing,
we recommend that this is carried out by
a qualified electrician who will replace it
with a lead of the same size and tempera-
ture rating.
Important: - ensure that you route all
mains and electrical cables and flexible
tubing well clear of any adjacent heat
source.
Under no circumstances should the mains
electric cable be allowed to come into
contact with hot oven flues or similar
surfaces and keep well clear of any mov-
ing parts that may be in the vicinity of
the installation, such as cooling fans on
adjacent appliances.
13.300