Table of Contents
Advertisement
General
•
It is important to clean the product
regularly as a build up of fat can af-
fect its performance or damage it and
may invalidate your guarantee.
•
Always switch off your appliance
and allow it to cool down before you
clean any part of it.
•
Do not use undiluted bleaches,
products containing chlorides, wire
wool or abrasive cleaners on alu-
minium, stainless steel, or plastic/
painted parts as they can damage
the appliance. Nylon pads can also be
unsuitable.
•
Take extra care when cleaning over
symbols on fascia panels. Excessive
cleaning can lead to the symbols
fading.
•
If your product is fitted with stainless
steel cladding strips. You may notice
a small white residue on the outer
edges, this can be removed with a
non abrasive wipe.
•
Some foods are corrosive eg; vinegar,
fruit juices and especially salt - they
can mark or damage the metal or
paint work, if they are left on the
surface.
•
Only use a clean cloth wrung out in
hot soapy water, and dry with a soft
cloth.
Stainless steel & Aluminium surfaces
•
Stubborn marks can be removed us-
ing a stainless steel cleaner. Supplies
can be purchased from the Customer
Care Centre.
•
Sharp objects can mark the surface
of stainless steel, but will become
less noticeable with time.
•
Baby oil can be used to restore stain-
less steel finishes - but only use a
few drops. Don't use cooking oils
CLEANING
as they can contain salts, which will
damage the metal.
Enamel surfaces & parts
•
If larger splashes of fat do not readily
disappear, you can use a mild cream
cleaner to remove them.
Glass parts
WARNING:- Do not use harsh
abrasive cleaners or sharp
metal scrapers to clean the
oven door glass since they can
scratch the surface, which may
result in shattering of the glass.
Chrome plated parts
•
Use a moist soap filled pad, or place
in a dishwasher
12.000
Hide quick links:
Advertisement
Table of Contents
