Installation - Belling Gas Hobs Users Manual & Installation Handbook

Hide thumbs Also See for Gas Hobs:
Table of Contents

Advertisement

Installation

This appliance must be installed in
accordance with the regulations in
force, and only in a well ventilated
space. Read the instructions before
using or installing this appliance.
This appliance will be factory set for
use on either natural gas only, or LPG
only. If the appliance requires conversion
from natural gas to LPG, then the
conversion kit, part number 0130145
00, can be ordered from the Customer
Care Centre helpline given at the back
of this book.
Regulations & Standards
Prior to installation, ensure that the local
distribution condition (nature of the gas
and gas pressure) and adjustment of
the appliance are compatible.
The adjustment conditions for this
appliance are stated on the data
badge.
This appliance is not connected to a
combustion products evacuation device.
It shall be installed and connected in
accordance with current installation
regulations. Particular attention shall
be given to the relevant requirements
regarding ventilation.
The appliance must be installed, con-
verted
to LPG (where necessary) and
serviced by a competent person to
ensure that the installation is in accor-
dance
with "The Gas Safety
(Installation & Use) Regulations", & the
"The Gas Safety (Installation & Use)
(Amendment) Regulations ".
Failure to comply with these
Regulations is a criminal
offence.
INSTALLATION
Where regulations or standards have
been revised since this handbook was
printed, always use the latest edition.
All gas installation, servicing and
repair work must be in accordance
with local standards and regulations
In the UK the regulations and
standards are as follows (inclusive
of successive issues:
1. Gas Safety Regulations
(Installation and Use).
2. Building Regulations - Issued by
the Department of the
Environment.
3. Building Standards (Scotland)
(Consolidated) - Issued by the Scottish
Development Department.
4. The current I.E.E. Wiring
Regulations.
5. Electricity at Work Regulations.
6. BS6172 Installation of Domestic
Gas Cooking Appliances
Also, for LP Gas refer to BS5482
Part 1, Part 2 or Part 3 as relevant.
7. Installation & Servicing Instructions
for this appliance.
For installation in countries other than
the UK, the appliance must be connected
in accordance with all local
gas and electrical regulations.
In the Republic of Ireland, installers
should refer to IS813 Domestic Gas
Appliances.
13.300

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

60t series70t series

Table of Contents