Setting The Clock Manually; Setting The Alarm Times - Sangean Pocket 640 User Manual

Setting the clock manually

1. With your radio switched on, press and hold the Menu button to
access the menu for the current mode.
2. Press the Tuning up/down button until "Time" is shown on the
display. Press the Select button to enter the setting.
3. Press the Tuning up/down button until "Manual" is shown on the
display. Press the Select button to enter the setting.
4. The hour digit will flash on the display. Press the Tuning up
down button to choose the desired clock hour. Press the Select
button to confirm the setting.
5. The minute digit will flash on the display. Press the Tuning up
down button to choose the desired clock minute. Press the
Select button to confirm the setting.
6. The date digit will then flash on the display. Press the Tuning
up/down to choose the desired date. Press the Select button to
confirm the setting.
7. The month digit will flash on the display. Press the Tuning up
down to choose the desired month. Press the Select button to
confirm the setting.
8. The year digit will flash on the display. Press the Tuning up
down button to confirm the setting.
Press the Select button to confirm the setting. Now the clock
setting is completed. You can press the
button to view the clock time.

Setting the alarm times

Your clock radio has two alarms which can be set to wake you to
either radio or buzzer alarm.
Each alarm can be set to sound once, daily, on weekdays or at
weekends. Ensure that the time is set correctly before setting the
alarms.
1. With your radio switched on, press and hold the Menu button to
access the menu for the current mode.
2. Press the Tuning up/down button until "Alarm 1 / 2" is shown on
the display. Press the Select button to enter the setting.
3. Press the Tuning up/down button to choose "Alarm 1" or "Alarm
2" and press the select button to enter the setting.
Note: When the radio is in standby mode, you can also press
and hold the Alarm 1 button or Alarm 2 button to enter the
alarm setting.
4. Press the Tuning up/down button to choose between 'Alarm On'
or 'Alarm Off' and press the select button to confirm the setting.
If 'Alarm Off' is selected, the current setting for that alarm will
be cancelled.
Choose 'Alarm On' to continue the alarm setting.
5. Press the Tuning up/down button to select the desired hour.
Press the Select button to confirm the setting.
Clock time display 6. Press the Tuning up/down button to select the desired minute.
Press the Select button to confirm the setting.
7. Press the Tuning up/down button to choose the alarm
frequency options, as following:
'Once': the alarm will sound once
GB
14