Adjusting Method - Sony DCR-DVD100 Service Manual

DSC-P100/P120
1-5-3.

Adjusting Method

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during LCD Adj.
2. VCO Adj.
3. Contrast Adj.
4. V-COM Adj.
5. White Balance Adj.
6. Release of Data Setting during LCD Adj.
[Adjusting method]
[LCD Adjustment Start]
1) Click the
2) The Automatic Adjustment Program executes the items from
"1. Data Setting during LCD Adj." to "3. Contrast Adj.".
3) Upon successful completion of the "3. Contrast Adj.", the fol-
lowing message is displayed during execution in "4. V-COM
Adj.". On the SEUS screen, operate the UP/DOWN key so
that the brightness of portions A and B on the LCD panel is
equal. After the adjustment, click the
4) Upon completion of "4. V-COM Adj.", "5. White Balance Adj."
is executed. The following message is displayed, and then check
that LCD screen is not colored.
If colored, change the data of page: 8F, address: 28 and 2A on
the SEUS Operation screen to adjust so that the LCD screen is
not colored.
[OK]
5) If the button is clicked, "6. Release of Data Setting dur-
ing LCD Adj." will be executed.
button.
[OK]
button.
Fig. 6-1-43
Fig. 6-1-44
Fig. 6-1-45
SEUS operation screen
Check on the LCD screen (V-COM Adj.)
6-22
UP/DOWN key
Fig. 6-1-46
A
B
A
B
B A
A B
Fig. 6-1-47