Sony DCR-DVD100 Service Manual page 21

DCR-DVD100/DVD100E
2-19.LB-084 BOARD (REMOVING OF THE EVF)-3
Caution
When attach the Sheet (VF),
fold the FP-603 flexible board
as shown in the illustration.
FP-603 flexible
board
Sheet (VF)
Caution
Be careful not to drop
the Cushion LB (40).
Two screws
1
(M1.7 × 2.5),
lock ace, p2
Pull out the VF slide assembly fully
2
in the direction of the arrow.
VF slide Cabinet (upper) assembly
VF slide assembly, etc.
B
Remove the LCD cabinet assembly and others from the two dowels and
6
cut-outs of the VF slide assembly.
Screw
5
(M1.7 × 2.5),
lock ace, p2
VF slide assembly
qs Lamp guide (40)
7 Sheet (VF)
qa Cushion LB (40)
q; Two craws
8 FP-603
flexible board
Projected part
A
3 Slide the VF slide cabinet assembly and others once
to the deep end, then slant them in the direction of
the arrow A to release the claw portion of the VF slide
assembly and finally pull them out in the direction of the
arrow B and remove them.
Screw
4
(M1.7 × 2.5),
lock ace, p2
Cut-outs
Two dowels
qj LCX032AN-5 (16P)
qf Prism sheet (40)
9 Two craws
qd Illuminator (40)
qk LB-084 board
2-14
Caution
Be careful not to drop
the Prism sheet (40) and
the Illuminator (40).
qh LCD cabinet assembly
qg LCX032AN-5