Sony DCR-DVD100 Service Manual page 25

DCR-DVD100/DVD100E
[SERVICE POSITION TO CHECK THE DVD DRIVE SECTION]
Connection to Check the VTR Section
To check the DVD drive section, set the DVD drive to forced PLAY mode.
Operate the DVD drive using the adjustment remote commander (with the HOLD switch set in the OFF position).
Setting the forced PLAY mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 02, and press the
PAUSE button of the adjustment remote commander.
AC power
AC IN
adaptor
Battery panel section
PROCEDURE OF REMOVING THE VC-307 BOARD.
(SERVICE POSITION) TO CHECK THE DVD DRIVE SECTION)
1 2-1. F PANEL SECTION .....................................
2 2-3. CABINET (R) SECTION ..............................
3 2-15. BATTERY PANEL SECTION........................
4 2-16. EVF SECTION..............................................
5 2-20. LENS SECTION...........................................
6 2-22. VC-307 BOARD............................................
Exiting the forced PLAY mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 00, and press the
PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
CN4901
CN4001
LANC jack
DC-IN jack
Adjustment remote
commander (RM-95)
(page 2-2)
(page 2-3)
(page 2-10)
(page 2-11)
(page 2-15)
(page 2-17)
2-18
CN4902
Extension cable (100P)
(J-6082-352-A)
VC-307 board
CN1008
CN1009
Monitor TV
CPC-8 jig
(J-6082-388-A)
AUDIO/
VIDEO jack