Table of Contents
Advertisement
HS-105P
Typical Applications
The HS-105P pan and tilt head can be controlled by one of the AutoCam touch
screen controllers or the MultiController II.
Refer to the User Manuals for your specific controllers for more information.
Touch Screen Controller Systems
Up to eight heads can be controlled by a single AutoCam touch screen controller
as shown below.
ACP
If the system includes one or more servo pedestals, the ACP controller is used.
HCP
The HCP is used when there are no servo pedestals in the system.
LCP
The LCP is customized for Legislative (and similar) applications.
MultiController II System
The compact MultiController II can control up to six HS-105P heads, or a com-
bination of HS-105P and other AutoCam heads.
1-10
Safety & Introduction
HS-105P
User Manual
Advertisement
Table of Contents
