Table of Contents
Advertisement
Before installation
,
Warning!
This appliance is very heavy and
can tip forwards when the door is
open.
^ Before installation, take any
accessories out of the appliance
and/or off the back of the appliance.
^ Remove any cable clips from the
back of the appliance.
^ Check that all the parts on the back
of the appliance can move freely.
Carefully bend any attached
components out of the way.
To protect the floor from damage when
installing the appliance,
^ fasten a left-over piece of flooring
(e.g. lino) to the floor in front of the
installation area.
Installing the Appliance
Installing the anti-tipping
brackets
The anti-tipping brackets keep the
appliance safely secured in the
installation niche and prevent tipping.
Make sure that there is no water
hose or electric cable in the
installation area that could be
damaged by screws.
,
Important!
The anti tipping bracket must be
fitted at the same height as the toe
kick area. If you set the appliance to
a higher level by laying spacers
underneath, the anti tipping bracket
must be fitted accordingly.
^ Mark the centre line of the appliance
on the back wall of the installation
niche. The centre of the anti-tipping
bracket must be aligned with this
line.
77
Hide quick links:
Advertisement
Table of Contents
