Brightness Of The Display - Miele KFN 9855 iDE Operating And Installation Instructions

Brightness of the display ^

You can adjust the brightness of the
display to suit the light conditions in the
room.
There are five different brightness
settings. The factory default setting is 5
(maximum brightness).
Changing the brightness of the
display
^ Touch the button for switching Super
Freeze on and off for 5 seconds.
The Super Freeze indicator ª to the
right of the display is on during this
time, and after 5 seconds S flashes in
the lower temperature display (freezer
section). The display shows MENU. You
are now in the settings mode.
^ Tap the button for setting the
temperature in the freezer section
until a flashing
lower temperature display.
^ Touch the Super button again.
The display shows ^ 0 to ^ 5:
– ^ 0: lowest brightness level
– ^ 5: highest brightness level.
^
appears in the
Additional Settings
^ You can change the brightness within
levels 0 to 5 by tapping the button for
setting the temperature in the freezer
section.
^ Touch the Super button again to
confirm your selection.
^ To leave the settings mode, touch the
button for switching the freezer
section on and off.
29