Table of Contents
Advertisement
Installation
Unduly high water pressure in the
system can result in damage to the
appliance.
Install a pressure reducing valve if
the water pressure in the system ex-
ceeds 116 psi (8 bar).
Do not install the system if the water
pressure exceeds 120 psi (8.3 bar).
Contact your plumbing specialist if
you are unsure of your water pres-
sure.
Installing the water hose to the appli-
ance
A faucet must be provided between
the water hose and the plumbed wa-
ter connection to ensure that the wa-
ter supply can be cut off if neces-
sary.
Make sure that the faucet is still ac-
cessible after the appliance has been
installed.
By this time, the installation niche
should already have been prepared so
that the appliance needs only to be
pushed into it.
When installing the water hose, make
sure that it is neither kinked nor dam-
aged.
Position the appliance slightly in front
of the installation niche so that the
faucet can still be accessed.
52
2
The water connection of the refrigera-
tion appliance is ready for connec-
tion at the rear of the appliance.
Install the water hose onto the wa-
ter connection at the rear of the
appliance. Ensure that it is screwed
into position correctly and watertight.
2
Connect the water hose to the
faucet.
Ensure that it is properly screwed into
position.
Slowly open the faucet in the water
supply line and check the whole wa-
ter system for leaks.
The appliance can now be installed in
the niche (see "Installing the appli-
ance").
7/16"
Advertisement
Table of Contents
