Table of Contents
Advertisement
Installing the Appliance
,
Warning!
This appliance is very heavy and
can tip forwards when the door is
open.
^ Before installation, take any
accessories out of the appliance
and/or off the back of the appliance.
^ Remove any cable clips from the
back of the appliance.
^ Check that all the parts on the back
of the appliance can move freely.
Carefully bend any attached
components out of the way.
To protect the floor from damage when
installing the appliance,
^ fasten a left-over piece of flooring
(e.g. linoleum) to the floor in front of
the installation area.
Installing the anti-tip brackets
The anti-tip brackets keep the
appliance safely secured in the
installation niche and prevent tipping.
Make sure that there is no plumbing
or electrical in the installation area
that could be damaged by screws.
,
Important!
The anti tip bracket must be
installed at the same height as the
toe kick area. If you set the
appliance to a higher level by laying
spacers underneath, the anti tip
bracket must be fitted accordingly.
^ Mark the center line of the appliance
on the back wall of the installation
niche. The center of the anti-tip
bracket must be aligned with this
line.
Installation
27
Advertisement
Table of Contents
