Inalto ICGW71 User Manual page 16

INSTALLATION INSTRUCTIONS
The mains supply cable should be replaced in accordance with the following instructions and by suitably qualified
licen
ced person:
► Switch the appliance off at your mains supply.
► Open the box of the supply board.
► Unscrew the clamp fixing the cable.
► Replace the cable with one of the same length and in accordance with the specification given above.
► The "green-yellow" earth wire must be connected to the terminal marked
live and neutral wires.
► The "blue" neutral wire must be connected to the terminal marked with letter (N) - the live wire must be connec
the terminal marked with letter (L).
USER MANUAL PAGE 16
. It must be about 10 mm longer than the
POWER CABLE
240V~
and
ted to