HOS Orbot Operation Manual page 6

• Lift the star-shaped screw knobs up and over the top latch bracket and turn clockwise to lock
properly (Fig. 3, 4)
Fig. 3
• Fill the water bottle with water. You can add a cleaning solution of your choice in the prescribed
mixing ratio.
• Place the filled water bottle close to the machine on the floor. Insert the filter into the water tank
(Fig. 5). Make sure that the filter reaches the bottom of the bottle.
Fig. 5
• Turn the water bottle counter-clockwise while you fix the container cap with your other hand. Seal
properly (Fig. 6).
Fig. 6
NOTE: Never seal the container by turning the cap itself! This can lead to distortion and damage
of the hoses.
• To insert and remove the water bottle in and out of the cage holder, insert or remove at an angle on
the top hoop of the cage holder. When inserting the bottle, push the container down until it rests
firmly (Fig. 7, 8, 9).
Fig. 4
3