Storage - HOS Orbot Operation Manual

Fig. 20
• NOTE: The machine base should now rest on the black bumper foot, located at the back of the
bumper. To avoid damage to the handle frame, DO NOT lay the machine frame on the floor as done
with other traditional cleaning equipment.
• Remove the pad from the driver plate by pulling it down firmly. To remove the HOS brush, see p.9.
• Put the machine frame in an upright position by pulling the black knob with the left hand and move
the handle frame upwards with the right hand. The black knob should lock firmly in the top hole.
• IMPORTANT SAFETY ADVICE: Always remove the power cord from the electrical outlet before
disconnecting it from the machine!
• To allow an easy transportation of the machine, remove the water bottle and the weight kit if used.
• To easily roll the machine, create a leverage effect by pushing your foot on the back wheel axle
and pull the handle towards your body. The ORBOT can be moved similar to a dolly now.

Storage

• Always store the Orbot with the base in the upright position.
• For storing the Orbot in tight spaces, we recommend that you fold down the handle frame. Open
the star-shaped screw knobs on the upper latch brackets by turning them counterclockwise. Fold
down the loosened screw caps. The handle can now be folded down (Fig.22).
Fig. 22
• IMPORTANT: The Orbot should only be stored in dry conditions!
Fig. 21
7