Hos Pads; Hos Superzorb Pads; Hos Glider; Hos Agiclean Pads - HOS Orbot Operation Manual

Table of Contents

Advertisement

HOS Pads

HOS SuperZorb Pads

The HOS SuperZorb pads are made of a cotton-polyester microfiber fabric. Because of their high
percentage and quality of cotton, they are highly absorbent and are ideal for cleaning carpets as
well as cleaning and drying wet or damp hard floors.
Wash the HOS SuperZorb pads before their first usage with regular laundry detergent and bleach
in a washing machine. WARNING: Never dry the pads in a dryer.
To clean the floor, center the driver plate on the SuperZorb pad. Eye judgment is sufficient.
With a diameter of 21", the SuperZorb pads are much larger than the driver base. This is intended
and allows the cleaning of furniture legs, edges, and baseboards.
Wash the pads after each use in a washing machine. After the wash cycle, stack the pads in the
moist condition. They are now ready for use. Don't dry the pads, as this might trap the dirt.
A SuperZorb pad, used on both sides, cleans 100-1000 sq. ft (10-100 m²), depending on the level of
soil.
The SuperZorb pads can be washed and reused, if cared for appropriately, up to 100 times.

HOS Glider

The HOS Gliders reduce the friction on textile surfaces. They are used to clean sensitive and long-
fiber carpets gently or to facilitate the handling of the machine on very rough carpets.
There are two types of gliders in different widths. The thin black glider is used on short-pile carpet,
while the slightly thicker white glider is used for cleaning medium-length to long-fiber carpets.
The gliders are suitable for use with the SuperZorb pads. Due to the Velcro surface, the gliders
stick to the pads.
Attach the glider on the pad so that it is located between the floor and the pad. Place the glider on
the floor, with the Velcro side facing up. Center the pad on top of the glider and place the driver
plate on the pad.
WARNING: Make sure to always have the flat surface of the glider facing the floor. Never put the
Velcro side on the carpet, as this might cause serious damage to the floor.

HOS AgiClean Pads

The beige AgiClean pads are made of a special blend of fibers and latex that allows the gentle
cleaning of heavily soiled short-pile carpets as well as the scrubbing of hard floors.
Attach the AgiClean pads by centering them onto the driver plate.
An AgiClean pad, used on both sides, cleans an approximate area of 1000 -2000 sq. ft (100 to 200
m²), depending on the floor type and the level of soil.
Rinse the AgiClean pads after each use with clean water.
HOS AkwaStrip Pads
AkwaStrip pads are made of a unique material impregnated with diamonds. They can be used for
deep cleaning and to remove wax off of vinyl, VCT, linoleum, wood, safety tiles and more.
An AkwaStrip pad, used on both sides, cleans an approximate area of 1000-2000 sq. ft (100 to 200
m²), depending on the floor type and the level of wax and soil.
Make sure to thoroughly rinse the AkwaStrip pads with clean water after each use.
13

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for HOS Orbot

This manual is also suitable for:

Orbot sprayborg

Table of Contents