Powering On The Router - 3Com 6000 series Getting Started Manual

Powering on the
Router
Figure 22 Set the terminal type
Checking before power-on
Before powering on the router, check that:
Both the power cord and the PGND are correctly connected.
■
The voltage of the power source complies with the requirement of the
■
router.
The console cable is correctly connected.
■
The PC or the terminal is set up and is running.
■
WARNING: Before switching on the power, locate the power switch in
the equipment room. In case of an accident, you can switch off power
quickly.

Powering on the router

Turn on the power switch on the router.
Powering on the Router 33