Powering On The Router - 3Com 3C13636 Installation Manual

3Com Router 3000 Ethernet Family
Installation Guide

3.1.2 Powering on the Router

After the router is powered on, the Boot ROM program runs first and the following system
information appears on the terminal screen:
Router starts booting... (V2.00)
Starting at 0x1500000...
********************************************
*
* 3Com 3000 Routers Boot ROM, V9.00
*
********************************************
Copyright(C) 1997-2003 by 3Com Corp CO., LTD.
Compiled at 17:11:06 , Aug 19 2003.
Testing memory...OK!
64M bytes
8192k bytes
Hardware Version is MTR 2.0
CPLD Version is CPLD 1.0
Press Ctrl-B to enter Boot Menu
System is self-decompressing.........................
....................OK!
System is starting...
Starting at 0x10000...
Press <Enter>. The system displays (if login authentication is not enabled):
<Router>
This prompt indicates that the router enters system view, and is ready for configuration.
SDRAM
flash memory
3. Starting and Maintaining the Router
*
*
*
3-4