Installing / Removing The Base Stand - Logik L39FE12 Instruction Manual

Installing / Removing the Base Stand

The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be
sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it.
DO NOT exert pressure on the front of the TV at any time because the screen could crack.
1. Disconnect all cables connected to the TV.
2. Lay the TV down on a flat surface with the back side facing up. Please make sure a soft cushioned material (such as a pillow or
thick piece of foam) is placed beneath the screen.
3. To install the TV stand, first attach
the base stand to the TV by using
screw A. Align the screw holes,
then secure with a screw driver
(not included) using the 4 screws A
provided.
GB
Remove the stand assembly before mounting the TV onto the wall.
4. To remove the stand assembly, untighten the 2 screws
B and 2 screws C holding the stand assembly to the
rear of the TV. Slide the stand assembly out.
Keep all the spare screws should you want
to use the stand assembly option.
5. Mounting on the wall. This TV is designed to be
wall-mounted with a standard 200 mm x 200 mm
mounting kit (sold separately) designed for flat-panel
TVs. Mount this TV according to the instructions
included in the mounting kit. Due to space restrictions,
we recommend that you make all connections (refer to
page 13-15 and page 42 for details) before mounting
on to the wall.
• Please read this instruction manual carefully while setting up your TV.
• If you require additional assistance please call our UK Call Centre on 0844 561 1234. Our UK
Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.
6
L39FE12_IB_120524_Glo.indd 6
TV Front
Base Stand
Front
Screw A x 4
(P.N.: 209060408B1)
Screw B x 2
(P.N.: 209100426B1)
Screw C x 2
(P.N.: 209100422B1)
Four mounting holes
(size M6x12 screw)
screw
unscrew
C B B C
200 mm
24/05/2012 5:23 PM