Lock Setting; Lock System - Logik L39FE12 Instruction Manual

Lock Setting

To access the LOCK menu, you must enter the password. Enter the default password "6666" for first time use. To change the
password, refer to "Change Password" (see below).

Lock System

The Lock System is designed to prevent accidental retuning of the TV / losing channels and prevent children watching unsuitable
programmes.
The Lock System must be set to On for this function to operate. If the Lock System is set to On, a valid password must be entered
when you access Auto Tuning / Manual Tuning / Restore Factory Default.
1. Press the MENU button on the remote control and then press the
buttons to select the LOCK menu and then press the OK button.
2. Press the buttons to select Lock System and then press the OK
button.
3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu.
The default password is "6666".
If you change the password, be sure to remember the new
password! If you forget the new password, enter the master
password"9527".
4. Press the buttons to select Lock System and then the OK buttons to
select On / Off.
If the Lock System is set to On, a valid password must be entered when you
access Auto Tuning / Manual Tuning / Restore Factory Default.
5. Press the BACK button to return to the previous menu or press the
MENU button to return to the main menu.
6. Press the EXIT button to exit the menu.
L39FE12_IB_120524_Glo.indd 35
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
EXIT
Lock System
Set Password
Block Channel
Parental Guidance Off
Please enter password
Clear Cancel
GB
35
24/05/2012 5:23 PM