Customising Tv Settings; Channel Setting (Tv, Dtv Or Radio Mode); Auto Tuning - Logik L39FE12 Instruction Manual

Customising TV Settings

Channel Setting (TV, DTV or Radio Mode)

Auto Tuning

Use this to automatically find and store all available channels. This is normally recommended if some channels have been added
or removed by the broadcaster or if you have moved house.
1. Press the MENU button on the remote control and then press the
buttons to select the CHANNEL menu and then press the OK button.
2. Press the buttons to select Auto Tuning and then press the OK
button.
3. In the Tune Type menu, press the
DTV + ATV. Press the
select the country where you will operate the TV. Press the OK button to
confirm.
4. Channel tuning will commence. This operation may take up to 6 minutes.
The display will show the progress of the tuning and the number of
channels found.
5. If you want to skip the ATV tuning, press the MENU button to interrupt
the tuning half way. A pop-up screen will be displayed, press the
button to select YES to confirm. You will then go straight to DTV tuning.
You may repeat the above step if you also want to skip the DTV tuning.
An installation reminder will appear the next time you turn on the TV.
6. After tuning is complete, the channels are arranged in a preset order. If
you wish to skip channels, modify the preset order or rename channels,
select Channel Edit under the channel menu (refer to page 21-22 for
details).
L39FE12_IB_120524_Glo.indd 19
buttons to select ATV / DTV /
button and then press the
Tune Type
buttons to
UK
Australia
Austria
TV
DTV
Radio : 0 Channel(s)
Data
36%...
Please press MENU to skip.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Channel Edit
Signal Information
CI Information
Software Update(OAD)Off
Software Update(USB)
DTV+ATV
Belgium Czech
Bulgaria
Denmark
Finland
Croatia
MENU
Channel Tuning
: 3 Channel(s)
: 0 Channel(s)
: 0 Channel(s)
668.75MHz (TV)
GB
19
24/05/2012 5:23 PM