Installing / Removing The Base Stand; Installing The Base Stand; Mounting The Tv To A Wall - Logik L32HE15 Instruction Manual

Installing / Removing the Base Stand

The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be
sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it.
DO NOT exert pressure on the front of the TV at any time because the screen could crack.
1. Disconnect all cables connected to the TV.
2. Lay the TV down on a flat surface with the back side facing up, and ideally at the edge of a table so that the base of the TV
slightly overhangs on it. Please make sure a soft cushioned material (such as a pillow or thick piece of foam) is placed beneath
the screen.

Installing the Base Stand

1. To install the TV stand, first attach the stand support to the TV by using 4 screw A. Align
with the screw holes then use 4 screws to fix the stand support to the TV.
2. To install the base stand,
align the screw holes, then
secure with a screw driver (not
included) using the 3 screw B
provided.
The screw holes will
only align if the front of
the base stand is at the
front of the TV.

Mounting the TV to a Wall

Remove the stand assembly before mounting the TV onto the wall.
1. To remove the stand assembly, untighten the screws
holding the stand assembly to the rear of the TV. Slide
the stand assembly out.
Keep all the spare screws should you want
to use the stand assembly option.
2. Mounting on the wall. This TV is designed to be
wall-mounted with a standard 200 mm x 200 mm
mounting kit (sold separately) designed for flat-panel
TVs. Mount this TV according to the instructions
included in the mounting kit. Due to space restrictions,
we recommend that you make all connections (refer to
page 15-18 and page 48 for details) before mounting
on to the wall.
• Please read this instruction manual carefully while setting up your TV.
• If you require additional assistance:
for UK, please call our UK Call Centre on 0344 561 1234.
for Ireland, please call our Ireland Call Center on 1 890 818 575.
Base Stand
TV Front
Front
Screw B x 3
Four mounting holes
Screw A x 4
screw in
unscrew
Screw A x 4
200 mm
(size M6 screw)
GB
screw in
9