Contents Preparation ......................................5 Unpacking the TV ..........................................5 Installing / Removing the Base Stand ..................................6 Front / Right Side View and Controls ...................................7 Rear View and Sockets ........................................8 Installing Batteries in the Remote Control ................................9 Remote Control Operation Range ....................................9 Remote Control ..........................................10 Connections ......................................13 Making Video and Audio Connections ..................................13 Connecting an AV Device Using an HDMI Cable..............................13...
Page 4
Using the Features ...................................39 EPG (Electronic Programme Guide) (DTV Mode) ..............................39 − Switch On / Off EPG ......................................39 − Select a Programme ......................................39 Teletext (ATV Mode) ........................................40 − To Turn on Teletext Function................................... 40 Digital Teletext (DTV Mode) ......................................41 −...
Preparation Thank you for purchasing your new Logik 19" Full HD LED TV with DVD Player. Your new TV has many features and incorporates the latest technology to enhance your viewing experience. We recommend that you spend some time reading this instruction manual so that you fully understand these features.
Installing / Removing the Base Stand The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert pressure on the front of the TV at any time because the screen could crack.
Front / Right Side View and Controls Item Description Illuminates blue when the TV is turned on. Illuminates red when the TV is in standby POWER LED mode. The LED will flash blue and red when the timer programming has started in standby mode.
Rear View and Sockets SCART VIDEO Socket Description Connects to a DVD player, Digital Set-Top-Box, or other AV devices with component Y, PB, PR / AUDIO (L/R) (YPbPr) video and audio output sockets. Connects to the Composite VIDEO and AUDIO (L/R) output sockets on external video VIDEO / AUDIO (L/R) devices.
Installing Batteries in the Remote Control 1. Press and lift the back cover to open the battery compartment of the remote control. 2. Insert two AAA size batteries. Make sure the (+) and ( - ) ends of the batteries match the (+) and ( - ) ends indicated in the battery compartment.
Remote Control Switch the TV between on and standby mode. MUTE Mute and restore your TV sound. 3. 0-9 Number Button • Press to select a programme. • Select numbered items in a menu. (DVD mode) 4. LIST • Display the channel list. (ATV / DTV mode) • Display the text page on the teletext screen.
Page 11
19. FAV Display the favourite channel list. (ATV / DTV mode) SETUP Display and exit the DVD setup menu. (DVD mode) 20. i Display the present screen information such as the current channel on ATV / DTV mode and the input source except ATV / DTV mode.
Page 12
Skip to the beginning of the next chapter / track / photo. (DVD / USB mode) REVEAL Reveal hidden information such as the answer to a quiz in teletext. (ATV mode) To skip to the beginning of the previous chapter / track / photo.
Connections Making Video and Audio Connections Not all AV devices have the ability to connect to a TV, please refer to the owner’s manual of your AV device for compatibility and connection procedures. When connecting any external AV device, do not connect the mains cable to the mains socket until all other connections are complete.
Connecting a Computer Using a VGA Cable Rear Right Side View of TV 1. Use a VGA cable to connect the TV’s PC IN input socket to a computer’s VGA output socket. Use an COMMON INTERFACE (CI) HDMI2 HDMI1 PC IN audio cable to connect the TV’s PC AUDIO input HEADPHONE PC AUDIO...
Connecting an AV Device Using a SCART Cable Rear Right Bottom View of TV 1. Use a SCART cable to connect the TV’s SCART input SCART socket to an external AV device’s SCART output socket. VIDEO 2. Plug the connected devices into the mains socket before switching on the TV.
Connecting Headphones Rear Right Side View of TV Connect your headphones to the TV’s HEADPHONE COMMON INTERFACE (CI) socket. HDMI2 HDMI1 PC IN HEADPHONE PC AUDIO Before putting on the headphones, turn the volume down then put the headphones on and slowly increase the volume until you reach a comfortable listening level.
Initial Setup Turning the TV On for the First Time 1. Connect one end of the RF coaxial cable to the aerial socket on the wall and the other end of the cable to the RF (75Ω) socket at the rear right side of your TV.
7. Channel tuning will commence. This operation may take up to 6 minutes. Channel Tuning The display will show the progress of the tuning and the number of channels found. : 3 Channel(s) 8. If you want to skip the ATV tuning, press the MENU button to interrupt : 0 Channel(s) the tuning half way.
Channel Selection • Press the CH + / – buttons on the remote control repeatedly or the 0-9 buttons to select the channel. Alternative Press the LIST button to enter the Channel List. Then use the buttons to highlight and select the channel. Press the OK button to view the selected channel.
Customising TV Settings Channel Setting (TV, DTV or Radio Mode) Auto Tuning Use this to automatically find and store all available channels. This is normally recommended if some channels have been added or removed by the broadcaster or if you have moved house. 1.
DTV Manual Tuning Allows you to make manual fine tuning adjustments to the channel under DTV mode. 1. Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button. CHANNEL PICTURE SOUND TIME OPTION...
3. The ATV Manual Tuning screen will pop up. Use the buttons to select ATV Manual Tuning the following options and the buttons to adjust the setting. Storage To 1 Storage To Presets the channel number. Sound System I Selects the sound system: I / DK / BG / L (for Sound System SECAM).
c. Move Press the YELLOW button and then press the buttons to move to the selected channel. Press the YELLOW button or the OK button to confirm. d. Skip Press the BLUE button to skip the selected channel. Press the BLUE button again to undo it.
CI (Common Interface) (DTV Mode) The common interface allows the use of a Common Access Module to enable you to view scrambled (pay to view) services. These services are provided by TopUp TV (UK only) and others. The Common Access Module and viewing card can be obtained from the service provider.
Software Update (Over Air Download) The TV auto detects the latest firmware through the DTV signal and allows you to accept or refuse the firmware upgrade service. 1. Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button.
Picture Setting Allows you to set your preferred picture mode. 1. Press the MENU button and then press the buttons to select the PICTURE menu and then press the OK button. CHANNEL PICTURE SOUND TIME OPTION LOCK EXIT EXIT 2. Press the buttons to select the following picture options and then press the OK button.
Page 27
Aspect Ratio Allows you to watch the screen in various picture formats: Auto / 4:3 / 16:9 / Zoom / Subtitle / Smart Zoom. Input Signal 4:3 Input Signal 16:9 Auto This selection will display This selection will display the picture according to the picture according to the aspect ratio of the the aspect ratio of the...
Sound Setting Allows you to select an audio-enhancement technique. 1. Press the MENU button and then press the buttons to select the SOUND menu and then press the OK button. CHANNEL PICTURE SOUND TIME OPTION LOCK EXIT EXIT 2. Press the buttons to select the following sound options and then press the OK button.
Stereo / Dual Sound Reception (ATV Mode) When a programme is selected, press the AD button to display the sound information for the selected station. Broadcast On Screen Display MONO / NICAM MONO Mono Stereo MONO / NICAM STEREO MONO / NICAM DUAL I, NICAM DUAL II, NICAM DUAL I+II Dual Mono sound selection If the stereo signal is weak, you can switch to mono by pressing the AD button.
3. Press the buttons to select the options. Press the OK button and then press the buttons to adjust each option’s setting. Clock The clock is set automatically when receiving a digital signal. Off Time Allows you to set the off time that will automatically switch off the TV. Cycle through and select from the following off time options: Off / Once / Every Day / Mon.~Fri.
2. Press the buttons to select OSD Language and then press the OK button. The default on-screen menu language is English. OSD Language English Audio Language Subtitle Language Hearing Impaired Country PVR File System Restore Factory Default 3. Press the buttons to navigate the menu and change the OSD Language settings.
Subtitle Language (DTV Mode) Allows you to select your desired subtitle language or turn off the subtitle. (Available for digital channels if multiple subtitle languages are broadcast.) 1. Press the MENU button and then press the buttons to select the OPTION menu and then press the OK button.
PVR File System (DTV Mode) Allows you to select your preferences in the PVR File System. 1. Press the MENU button and then press the buttons to select the OPTION menu and then press the OK button. CHANNEL PICTURE SOUND TIME OPTION LOCK...
CEC (Consumer Electronics Control) Allows you to command and control two or more CEC-enabled devices, that are connected through HDMI, by using only one of the TV remote controls (e.g. controlling a TV set, set-top box and DVD player using only the remote control of the TV). CEC also allows individual CEC-enabled devices to command and control each other without user intervention.
3. Press the button to select “Yes”. The TV will turn off and restart after a few seconds. Press the button to select "No" to cancel and return to the main menu. Are you sure? All channel and user settings will be lost and the TV will revert to "First Time Installation".
Set Password 1. Press the MENU button and then press the buttons to select the LOCK menu and then press the OK button. CHANNEL PICTURE SOUND TIME OPTION LOCK EXIT EXIT 2. Press the OK button to select Lock System. Lock System Set Password Block Channel...
Block Channel Block Channel is designed to prevent children watching unsuitable programmes. When a channel is blocked, a valid password must be entered. 1. Press the MENU button and then press the buttons to select the LOCK menu and then press the OK button. CHANNEL PICTURE SOUND...
Parental Guidance This function allows you to set up blocking schemes to block specific channels and ratings. It operates according to information from the broadcasting station, therefore if the signal has incorrect information, this function will not operate. This allows you to set up blocking schemes to block specific channels and ratings.
Using the Features EPG (Electronic Programme Guide) (DTV Mode) This system has an Electronic Programme Guide (EPG) to help you navigate through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of programme information will vary, depending on the particular broadcaster).
Teletext (ATV Mode) Teletext is a free service broadcast by some TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. Using the Teletext control buttons you can view pages of information that are listed in the teletext index.
Digital Teletext (DTV Mode) Digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You will need to turn off Subtitle Function before using teletext (refer to page 32 for details). Teletext within Digital Service 1.
Entertainment Connecting a USB Storage Device 1. Switch off the TV before connecting any USB Rear Right Side View of TV storage device. COMMON INTERFACE (CI) HDMI2 HDMI1 PC IN 2. Connect your USB storage device to the USB port HEADPHONE PC AUDIO of your TV.
4. Press the buttons to navigate in the picture folder and then press the OK button. If you want to select the specified photos, press the buttons to select the picture file and then press the OK button. A tick box will be displayed.
6. Select the music you want to play, it will show the music information (Album / Title / Bit Rate / Artist / Sampling / Year / Size). Then press the PLAY button to play. 7. Press the buttons and then press the OK button to select the function: Pause / FB / FF / Prev / Next / Stop / Repeat All / Playlist / Goto Time.
My Text 1. Press the button on the right side panel of the TV or the INPUT button on the remote control then press the buttons to select the USB mode and then press the OK button. 2. Press the buttons to select TEXT and then press the OK button.
PVR (Personal Video Recorder) Time Shift Function This function allows the TV to virtually record the live viewing broadcast programme. If the transfer rate of the USB storage device is too slow • Time Shift Mode and Recording functions for recording or time shift function, a warning statement may not work if the signal strength is weak.
Recording DTV Programme onto a USB Storage Device Use this function to record the DTV programme you are watching on the main screen and save it for future viewing. The recording from timer programme or direct recording may have a little bit of delay when it starts to record the broadcast programme.
Timer Programming This function is used to perform scheduled recording. The recording from timer programme or direct recording may have a little bit of delay when it starts to record the broadcast programme. Please make sure the USB device is inserted. If not, a warning message will pop up. 1.
Play Recorded Programme You can play a recorded programme from the recorded programme list or from a USB Storage Device. 1. Press the button on the right side panel of the TV or the INPUT button on the remote control and then press the buttons to select the USB mode and then press the OK button.
Using the DVD Features Using the Built-in DVD Player 1. Insert a disc with the label side facing towards the front of the TV. (CD-R, CD-RW, DVD-R, DVD-RW, CD, DVD+R, or DVD+RW) Allow 10 seconds for the player to load the disc. If you insert the disc wrongly, an error message will be displayed.
Basic DVD Playback Functions Playing the DVD Depending on the disc, a menu may appear on the TV screen once the disc has loaded. When playing the disc, you may use the PLAY / buttons on the remote control to toggle between Play and Pause mode. This product button on the unit or the also supports Menu / Title / Sequential / Programme Playback.
Display (for DVD / Multimedia discs) Press the i button to activate the on screen roll-down menu for the current Title, Chapter, Time and other information. Press the i button repeatedly to turn off the on screen display. For JPEG discs, press the i button once to display first page: Disc type, Track -/- (Current / Full). Press the i button repeatedly to turn off the screen display.
Playing Multimedia Discs MP3 / WMA / JPEG PLAYBACK When you insert a MP3 / WMA / JPEG disc while in DVD mode the menu on the right will appear. Press the buttons to choose the root directory and then press the OK button to enter into the sub directory.
Page 54
1. Repeat steps 1 and 2 as described in “Adding files to the Program List” section. 2. Press the button on the remote control STOP to skip to the left screen in Browser view. /jpeg / Picture 02.JPG Press the buttons on the remote control Picture 01 Edit mode...
Using the DVD Language Setup Page In DVD mode, press the SETUP button on the remote control. Press the buttons to select the Language menu and then press buttons to select the menu options. Press the SETUP button to exit the button to enter the sub menu.
Using the DVD Rating Setup Page In DVD mode, press the SETUP button on the remote control. Press the buttons to select the Rating menu and then press buttons to select the menu options. Press the SETUP button to exit the button to enter the sub menu.
Maintenance Maintenance Careful and regular cleaning can prolong the life of your TV. Be sure to press the button at the front right side of the TV or on the remote control to turn off the TV. Disconnect the mains cable from the mains socket before any cleaning.
Hints and Tips Hints and Tips The following table contains various hints and tips to get the best performance from your TV. If you require additional assistance please call our UK Call Centre on 0844 561 1234. Our UK Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.
Page 59
There is a problem in PC mode. The signal is out of range (Invalid • Adjust the resolution, horizontal frequency, or vertical frequency. format) Vertical bar or stripe on background • Use Auto configure or adjust clock, phase, or H/V position. &...
Display Modes Display Modes The screen resolution has been optimised during production for the display modes listed below. Whilst the TV is capable of accepting a 1080p input, it is not capable of displaying this screen resolution and therefore the display will be scaled to fit the native resolution of the screen automatically.
Specifications Specifications Model L19HED12 Panel System 19 inch LED Backlit LCD Panel Display Resolution 1366 pixels (horizontal) x 768 pixels (vertical) Television System PAL I / BG / DK SECAM L / BG / DK Brightness 200 cd/m Contrast Ratio...
Page 62
ENERG L19HED12 kWh/annum Watt inch - 2011 2010/1062...
Safety Warnings Safety Warnings • Read all the instructions carefully before using the unit Safety and keep them for future reference. • Always disconnect the unit from the mains supply before connecting / disconnecting other devices or • Retain the manual. If you pass the unit onto a third moving the unit.
Page 64
Standby CAUTION • button on the remote control does not switch off the unit completely. The unit will continue to draw RISK OF ELECTRIC SHOCK DO NOT OPEN electricity from the mains supply while in standby. In The lightning flash with arrowhead symbol, the interests of safety and to avoid unnecessary energy within an equilateral triangle, is intended to consumption, never leave the unit in standby while...
Page 65
If you require a replacement for any of the items listed below, please quote their corresponding part numbers: Replacement Part Part Number TV Stand Support 115C2461101 TV Base 102C1961113 Remote Control 504C1961101 AAA Batteries 32200007158 Screw A 209100422B1 Screw B 20912223101 Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories.